Call Today

 

 

Here in the next paragraph you will discover a lot of sensible information about How to Troubleshoot and Repair an Electric Water Heater.

Lots of contemporary homes make use of an electric hot water heater for their heater, due to its convenience and also simplicity of use. Nonetheless, much like any other electrical devices, issues might develop with its usage, all of a sudden. It can be really irritating to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the instance may be, hot water heater issues can be rather nerve-racking. The good news is, we've made a list of feasible services to your water heater concerns. There are a number of factors that can trigger a lot of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the trouble is, getting it repaired need to not position way too much of a problem if you follow these actions:

 

Check Your Power Supply:

As standard as this may appear, it is extremely essential. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power problem. Examine if the fuse is blown out or the breaker tripped. If the breaker is the issue, just turn it on and off again. Replace any kind of damaged or damaged fuse. Evaluate the device with power after these changes to see if it's now functioning.

 

Check the Burner in the Water Heater:

If it's not a power issue, after that attempt having a look at your heating element if it is still functioning. Test each of your burner to be sure the issue isn't with any of them. If any one of them is faulty, replace that component and then examine whether the hot water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you may require to check the temperature level settings on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open the accessibility panel as well as press the red switch for temperature reset above the thermostat. This need to help heat up the water. Transform the circuit breaker back on and also check if the issue has actually been dealt with.

 

Call A Specialist:

If after replacing all defective components and resetting your temperature, the hot water heater still isn't functioning, you may require to call a specialist plumber for a specialist opinion. The problem with your heating unit could be that the cold and hot faucets have actually been switched over or it may be undersized for the amount of hot water needed in your house. Whatever the situation might be, a specialist plumber would certainly help solve the problem.

 

Final thought

Water heater issues are not constantly significant. Most of them result from small issues like a blown fuse or worn-out heating element. Replacing the faulty parts ought to do the trick. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to find to get it fixed.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

I am just very intrigued by How to Troubleshoot and Repair an Electric Water Heater and I hope you liked our piece. Don't hesitate to take the opportunity to promote this blog if you enjoyed it. Many thanks for going through it.

Instant Quote